|
Fox
| Item |
Each Ride |
25 |
100 |
Annual or 200 |
| Wash and dry exterior |
X |
|
|
|
| Clean dust wipers & ispect/lube foam rings |
|
X |
|
|
| Inspect drop-out thickness |
|
X |
|
|
| Inspect bushings |
|
|
X |
|
| Change FLOAT fluid in air chamber (FLOAT, F100 & F80) |
|
|
X |
|
| Change Oil |
|
|
X |
|
Additionally, the TALAS mechanism should be serviced every 300.
Marzocchi
| Item |
Use |
| Intense |
Normal |
| Check that screws are tightened to required torque |
Before Every Ride |
| Stanchiones cleaning |
After Every Ride |
| Air pressure control |
Before Every Ride |
10 |
| Oil seales control |
25 |
50 |
| Oil change |
50 |
100 |
| TST2 / TST5 cartridge replacement |
25 |
50 |
| SFA / TST2 / TST5 / ATA Fork oil seals cartridge replacement |
50 |
100 |
Rockshox
| Item |
Judy
1/2 |
Judy
3/4 |
SID Race, SL & World Cup |
All 32mm XC & All Mountain Air Forks |
All 32mm XC & All Mountain Coil Forks |
Boxxer ride, Race & Team |
Boxxer WorldCup |
| Clean dirt and debris from upper tubes |
E |
E |
E |
E |
E |
E |
E |
| Inspect upper tubes for scratches |
E |
E |
E |
E |
E |
E |
E |
| Lubricate dust seals/upper tubes |
10 |
10 |
10 |
10 |
10 |
E |
E |
| Check top caps, brake posts and shaft bolts for proper torque |
25 |
25 |
25 |
25 |
25 |
25 |
25 |
| Check air pressure |
|
|
E |
E |
|
|
E |
| Remove lowers, clean/inspect bushings and change oil bath |
|
50 |
50 |
50 |
50 |
25 |
25 |
| Change oil in Motion Control System |
|
|
100 |
100 |
100 |
50 |
50 |
| Clean and lubricate Air U-Turn/Dual Air/Air assist assembly/Solo Air |
|
|
50 |
50 |
|
50 |
25 |
| Clean and lubricate coil spring or coil U-Turn sprin assembly |
100 |
100 |
|
|
100 |
|
|
| Clean and lubricate PopLoc cable and housings |
|
|
50 |
50 |
50 |
|
|
|
